How to Install Kitchen Faucet

How to Install Kitchen Faucet How to Install Kitchen FaucetBefore Beginning:

Observe all local plumbing and building codes. Turn off the water supplies. Before installation, unpack the brand new faucet and inspect it for damage. Return the tap towards the carton until you are prepared to set up it. Carefully inspect waste and offer tubing for just about any manifestation of damage and replace if required. For brand new installations, assemble the tap towards the sink before setting up the sink. If supply tubes should be cut, permit needed transmission into shut-off valve.

1. Install the Spout and Handspray

NOTE: Before using local plumbers putty or any other sealant towards the escutcheon, make certain the O-ring is within devote the groove around the interior surface. Apply a bead of local plumbers putty or any other sealant towards the bottom from the escutcheon based on the manufacturer’s instructions. Thread the shank nut and washer to the foot of the shank. Place the shank from the foot of the sink. Slide the escutcheon within the shank. Thread the spout to the foot of the shank, then release the spout 1/8 of the turn. Release the shank 1/8 of the turn. Important! Don’t release the shank a lot more than 1/2 turn. The spout might not seal, producing a leak. Tighten the nut and washer to secure wartrol holder towards the sink. Slide the gasket (provided) to the spray holder. Slide wartrol holder with the mounting hole previously mentioned. Safely hands tighten the nut towards the spray holder from underneath the sink. Place the handspray hose with the spray holder. Attach the handspray hose towards the shank tee using thread sealant.

2. Install the Valve Body

Apply thread sealant towards the coupling nut threads from the flexible hoses. Thread the flexible hoses towards the valve body shops and wrench tighten. Don’t over tighten. Apply a bead of local plumbers putty or any other sealant towards the bottom from the escutcheons based on the manufacturer’s instructions. Place the valve physiques in to the mounting holes from the top the sink. Make certain the valve is set up in the left-hands hole and also the cold valve is set up in the best-hands hole. Use a washer after which a nut to the foot of the valve physiques. Align the valve physiques therefore the copper tubing faces the outdoors. Wrench tighten the nuts. Remove any excess local plumbers putty. Connect and wrench tighten the hoses towards the shank tee. Don’t over tighten.

3. Install the Handles

Set the valve stem towards the closed position by rotating the stem counterclockwise until it stops. Thread the bonnet to the escutcheon. Place the stem extension in to the bonnet and press it to the valve stem. Lever Handles Correctly align the lever handle. Press the lever handle to the stem extension. Secure the lever handle using the screw. Six-Prong Handles Secure the stem extension using the screw. Press the handle to the stem extension using the text around the ceramic button correctly aligned. Secure the handle using the setscrew.

4. Install the Supplies

NOTE: When the sink isn’t installed, do the installation at this time around. Make sure to follow all instructions full of the sink. Slide the coupling nuts and ferrules to the supply tubes. Secure the provision tubes and valve body basins with coupling nuts. Carefully place the provision tubes in to the valve body basins and shut-off valve shops (if used). Squeeze round finish from the supply tube squarely towards the valve body inlet and offer stop. Tighten all coupling nuts.

5. Installation Checkout

Make sure that both faucet handles are switched off. Hot is clockwise close and cold is counterclockwise close. Switch on the cold and hot water supplies. Look for leaks. Take away the aerator by turning it counterclockwise. Switch on the cold and hot faucet handles for one minute to purge debris in the faucet. Close the cold and hot faucet handles. Reattach the aerator by turning it clockwise until hands tight.

No related posts.

Comments are closed.

Categories
Archives